Frequently Asked Questions
If you have any moving questions that need to be answered, Berger’s FAQ moving checklist can be a big help. We have researched the most commonly asked moving questions, and then answered them all via this moving checklist. From pre-move to claims, we answer all your moving questions on Berger’s FAQ moving checklist.
Moving FAQ: Pre-Move
When is the best time to move?
The busiest times for moving companies are during the summer months, May 15 – September 15. At the end of these months, the volume of shipments is extremely heavy. This is the case for all professional moving companies.
Take all the factors into consideration when deciding on the best time for you to move. If you have some flexibility in your schedule, provide Berger with a five day window for loading your shipment. This will allow the individuals who schedule the drivers and crew member greater flexibility when scheduling your move. If possible, be flexible with your destination timeframe as well. Keep in mind that you most likely are not the only shipment on the truck. If you stay flexible, it should make a difference.
How do I select which moving companies will provide me with a moving estimate?
Ask your neighbors, friends, coworkers and family members if they can make recommendations. Investigate each of the movers you select with the Better Business Bureau. Good service is the best measure of a good mover!
Select the Berger location nearest you to view our Better Business Bureau reports:
- Atlanta, GA
- Austin, TX
- Charlotte, NC
- Chicago, IL
- Cincinnati, OH
- Cleveland, OH
- Columbus, OH
- Dallas/Fort Worth, TX
- Houston, TX
- Las Vegas, NV
- Los Angeles, CA
- Louisville, KY
- Minneapolis/St. Paul, MN
- Phoenix, AZ
- San Antontio, TX
- Tampa, FL
When should I begin contacting moving companies for estimates?
Try to provide the moving companies with as much notice as possible, especially if you are moving during the busy season as noted above. Six weeks from the actual move date is not too early for estimators to come into your home to complete what they refer to as a “visual survey of your household goods shipment”. Add even more time to make a decision if you are obligated by your employer to submit estimates for approval. Try to decide which mover you will use four weeks from your actual load day. Call the mover to confirm your booking and schedule your packing, loading and delivery dates. This timeframe can be shortened in the off peak season which is September 15 through May 15.
What happens when a relocation consultant comes to my home?
The relocation consultant will arrive at your home to complete the visual survey of your items. Once this is completed, the relocation consultant will calculate the weight, packing cost and any other charge related to your move. Remember that the relocation consultant must clearly see what you are moving in order to provide you with an accurate estimate. Crawl spaces, attics and cluttered closets can be deceiving, so organize your house before the relocation consultant arrives.
Don’t be alarmed if the relocation consultant goes through all your cabinets and closets or looks under beds and on top of cabinets. He or she must be able to see what is moving and possibly needs packing. If you know of items that are out of view, be certain to point them out to the relocation consultant. If there are items you will be eliminating, be sure to point them out as well.
One word of caution that can save you a great deal of trouble on loading day. Get rid of all items you do not plan to move. Otherwise, there may not be enough space for your shipment. This will not occur on one or two small items, but if you anticipated eliminating an entire bedroom suite and do not do so, it is quite possible that this could violate the integrity of your binding estimate and/or cause the drivers to run out of space.
Moving FAQ: Pricing and Paperwork
What is a binding estimate?
A binding estimate is a contract that specifies, in advance, the precise cost of the move based on the services requested or deemed necessary at the time of the estimate. If additional services are requested or required at either origin or destination, the total cost will increase.
What is a non-binding estimate?
A non-binding estimate charges you according to the actual weight of your shipment and the actual cost of the services that are performed. You will still go through the estimating process to determine what your shipment may cost.
To verify the weight of your shipment, the driver will weigh his trailer prior to loading your shipment. Once your shipment is on board, the driver will weigh his trailer again. All other charges will be calculated at your origin address. If there are any additional charges that are incurred during the delivery process, the driver will provide you with the additional cost. This is a rare event, but it may occur.
How is the cost of my shipment calculated?
If you are moving to a new state, the charges are based on the weight of your shipment and mileage. These are referred to as the transportation charges. There are a variety of different charges that could appear on your estimate, so be sure to ask your relocation consultant to explain each item charge for you. Some of the additional charges that may appear include packing, crating, valuation or coverage, bulky article charge for oversized items and extra labor. Again, be certain you understand these charges so that you can accurately compare the estimates you receive.
How should I pay and what are the payment methods?
Tariff provisions require that all charges be paid before your shipment is unloaded at destination. Payments can be made using cash, certified check or money order. Other payment options such as a credit card can be arranged with Berger. Discuss these options with the relocation consultant and/or the customer service representative assigned to your shipment. In the event that your employer is paying for the move, the employer may pre-arrange to be billed via invoice. Whatever works for you is great. Just be sure to have this all worked out prior to packing and loading. If the method of payment is not established prior to load day, it can cause you problems on delivery day.
What is an Order for Service?
All movers are required to prepare an Order for Service before they transport your shipment. The Order for Service provides you with written confirmation of the services that you requested to be performed in conjunction with your shipment. It lists the agreed upon dates for pickup and delivery of your shipment and the amount of valuation that you requested, along with any special services that you ordered and a place and telephone number where the mover can contact you during the move.
The Order for Service also shows the charges that you will be assessed for your move. If you are moving under a non-binding estimate, the Order for Service will indicate the amount of the estimated non-binding charges, the method of payment for the charges and in case the actual charges exceed the non-binding estimate, the maximum amount that you are required to pay at the time of delivery to obtain possession of your shipment (you will have 30 days following delivery to pay the balance of the charges due). If you are moving under a binding estimate, the Order for Service will show the charges that you will be required to pay at delivery, based on the binding estimate and the terms of payment. You and Berger must sign the Order for Service.
What is a Bill of Lading?
Every mover is required to prepare a Bill of Lading for every shipment transported. The Bill of Lading is the receipt for your goods and the contract with Berger for transportation. The driver who loads your shipment must give you a copy of the Bill of Lading.
It is your responsibility to read and understand the information on the Bill of Lading before you sign it. The Bill of Lading identifies the mover and specifies when the transportation is to be performed. It also specifies the terms and conditions for payment of the total charges and the maximum amount required to be paid at the time of delivery if you are moving under a non-binding estimate. Information regarding the valuation of your shipment and the amount Berger will be liable for in the event of loss or damage is also shown.
What is an Inventory?
The driver will usually inventory your shipment as he or she loads it (but it’s not required by law). When completed, the inventory provides a detailed, descriptive listing of your household goods and the condition of each item when received by Berger.
Be sure that everything listed on the inventory is correct. This is not always the easiest task, as you will find things written on the inventory like PBO, which means Packed By Owner. The contents of this carton can’t and won’t be listed because the driver is not able to see inside each and every box. You will also find CP on a line item in the inventory. This means Carrier Packed container. These are two important listings.
You will also notice that in the middle column on the inventory form a line that has many letters and numbers associated with a specific item but it may make no sense to you. This is where the driver uses inventory code to make note of the condition of that particular piece. To understand this code, look at the top of the inventory sheet for the legend that explains what that code means. SC – scratched, C – chipped, 3 – right side of piece and 8 for the top of the piece. This is a simplified way for the driver to make note of any irregularity or existing damage.
Remember, this inventory is for you to keep track of what is loaded and the condition of each item. If damage occurs on a particular piece during the loading process, get the inventory tag number on that item and make a note in the far right hand column on the line that corresponds with that piece. This is the document that will be scrutinized when the claims process is initiated so it is important to have the damage clearly noted.
This inventory should also be used at destination when your shipment is delivered. Use the inventory to verify the articles that are delivered and again note an exception to the condition of the items as they are brought into your home. Point out the damage to the driver.
What often occurs is that a piece of furniture has been in your home for many years and you grow accustomed to looking at it in a certain place and in a certain light. When you bring that same piece into your new home, you may notice damage that may have been there for a long time. The driver will have noted the scratch or chip at your origin residence. If you are not sure if it was existing damage or new damage, ask your driver to explain the condition of the piece as he noted on the inventory during the loading process. This is the quickest way to clear up what is new damage and what was there all along.
Berger drivers are very careful about the way they handle your items and the inventory is their safeguard against felonious damage claims. Use this inventory as a positive tool to make sure that you are protected just as the driver will use it to protect him or her.
Moving FAQ: Packing
Can I pack anything in the drawers of my dresser or desk?
All loose items must be packed in boxes to prevent loss or damage. It is recommended that you pack all items and leave the drawers empty.
Will the driver load all the boxes that I packed?
Yes, as long as the driver deems them safe for transport.
How should I pack my waterbed?
Waterbeds need to be drained completely. Fiber-filled waterbeds need to be professionally vacuum-drained in advance of your move date.
Can I pack and move my plants?
Most moving companies will not take your plants. The stress and heat of being inside of the moving trailer usually causes them to die. Many states do not allow the entry of plants while other states will admit plants under certain conditions. There are some states that have no regulations at all. Be sure to understand your state’s regulations prior to moving the plants in your own vehicle.
What should I do with my jewelry and other valuable items?
Items of extraordinary value such as jewelry, money, antiques and stamp collections can be included in your shipment, provided that you notify Berger of these items before packing and moving day. It is strongly recommended that you carry irreplaceable and expensive articles with you or make other arrangements for their transport.
In the moving industry, items worth more than $100 per pound are considered to be articles of “extraordinary” value. To be assured that a claim involving these articles is not limited to minimal liability, complete and sign Berger’s high value inventory form. Also be sure to sign the “Extraordinary (Unusual) Value Article Declaration” box on the Bill of Lading.
Each mover has a slightly different procedure to follow as it relates to high value items. Ask your relocation consultant to provide you with an explanation of their process. This is a confusing but important task, so make sure that you clearly understand the rules prior to load day.
How do I prepare my appliances for moving?
Appliances such as washers, dryers and refrigerators must be disconnected, and the washer must have a stabilizer installed. Again, your estimator can help you understand how to have these items serviced. All local moving companies have business relationships with local service providers that handle this type of service. Be sure you know who Berger is using as you will need to let these people into your home to provide the service.
How will Berger protect my upholstered furniture?
Berger uses a special procedure called stretch-wrap. It is a heavy, clear plastic wrap that protects your furniture from being soiled.
Moving FAQ: Valuation of Coverage
Am I protected against loss or damage while my goods are in transit?
Yes, but how much protection you have and its cost to you depends upon the valuation coverage you selected. This can be one of the most confusing aspects to moving but it is important that you understand what is being provided to you.
The valuation option you choose determines the basis upon which any claim will be adjusted and the maximum liability of the carrier. The liability of a carrier loss or damage is based upon the carrier’s tariffs, as well as federal laws and regulations that have certain limitations and exclusions. Valuation is not coverage. This is important to understand. It is the liability of the moving company. Check with the provider of your homeowners coverage to find out if you are covered for moving. Often times you will find that you are.
RELEASED VALUE – This is the most economical as it is no cost to you. This option provides only minimal protection and is not sufficient coverage for almost all shipments. It will pay you $0.60 per pound per article if lost or damaged. That means a piece of furniture weighing 75 lbs would receive a settlement of $45.00. You will be asked to initial the Bill of Lading if you select this coverage. The only place this is applicable is if your coverage policy covers your goods for their entire value and this would be considered supplemental coverage for you.
FULL EXTRA CARE PROTECTION – This is your most comprehensive coverage. You may hear it referred to as “full replacement value” as well as “full value protection”. If you elect to purchase full value protection, articles that are lost, damaged or destroyed will be either repaired, replaced with like items or a cash settlement will be made for the current market replacement value, regardless of the age of the lost or damaged item. Depreciation of the lost or damaged item is not a factor in determining replacement value when the shipment is moved under full value protection.
The cost of full value protection may be further subject to various deductible levels of liability that may reduce your cost. Ask Berger for the details of our specific plan.
Moving FAQ: The Move
How do I prepare my home and myself for move day?
Berger may ask you to select from one to several consecutive days during which your goods will be loaded. The amount of days in what is referred to as a load spread depends upon the size of your shipment and the time of year when your shipment is loaded. Remember to try to remain flexible during the busy season by allowing for extra days on your load spread to have a better chance of securing a truck and driver to load your shipment.
The customer service representative and/or driver will contact you at least 24 hours prior to load day to let you know time of arrival. Be sure to share any changes that have taken place that may affect loading day. A good example of changes that may take place is that the street in front of your home is now under construction, preventing the large over-the-road truck to get near your home. You may have not completed the packing as something unanticipated took you away from packing. Contact Berger as soon as possible so that we can send out professional packers to complete the job for you.
Make sure your home is ready for the crew. Move anything off the porch and walkways that may obstruct movement of your goods out of the home. Take doors of the hinges if you know certain items will not fit through. Remove all small throw rugs from traffic areas that could cause the driver or crew to trip or slip.
Have water or sports drinks on hand for the driver and crew, especially on a hot summer day. They will come prepared but will be grateful for your thoughtfulness.
Our drivers will prepare the home with runners, door jamb protectors and railing protectors if applicable. This will help save on the little knicks that occur during the loading process.
How will I know where my shipment is once it leaves my home?
Allied’s satellite tracking capabilities will allow you to trace the whereabouts of your shipment and driver, many times over the internet. Please be certain to ask your relocation consultant for details.
How will I know when my shipment is going to be delivered?
Your driver will contact you 24 hours prior to delivery. Berger will assign a customer service representative as your primary contact and they will be able to provide you with an update as to the date your goods will arrive.
Be certain to provide the driver with all your contact information. The phone number at the new home is only good if there is a person there to take the call. If you can be reached at work, a hotel or temporary residence or by email, let the driver know. If you will be impossible to reach, make arrangements with a friend or family member to serve as the liaison between you and the driver and provide the driver with that contact information.
Moving FAQ: Claims
How do I file and receive my settlement on my claim?
Claims are always unpleasant – no one wants to have to deal with the problem but damage does occur and claims are a result. The best advice is to understand the claims settlement procedure prior to moving. It is important that you understand your coverage and how to proceed through the claims process.
Claims adjusters are people with a difficult job. It is better to approach them with kindness than anger. Understand your coverage and be certain to have the proper documentation in the form of an inventory with the damage noted.
How was Berger’s Moving FAQs?
Did we answer all your moving questions through our FAQ moving checklist? If not, feel free to contact us regarding any further moving questions you may have about your upcoming relocation.